KENKO PRO300 3,0x CONVERTER NIKON

Beschikbaarheid: Op voorraad

Adviesprijs: € 309,00

Onze prijs: € 249,00

(inclusief 21% BTW)
Excl. BTW: € 205,79

Verzenden

Tijdelijk niet op voorraad.
Het product is momenteel niet op voorraad, maar we bestellen het graag voor je!

Verzendkosten: Vanaf € 5,95

Afhalen in een van onze winkels

Amsterdam-C. op bestelling
Haarlem-C. op bestelling

KENKO PRO300 3,0x CONVERTER NIKON


KENKO Teleplus Pro 300 converters are made with precision quality multicoated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. These glass elements were designed to match the optical quality of the prime lens (even at the edges) and telephoto zoom lenses. The optical design of the elements and light path is wide enough not to cause vignetting.

meer informatie

The PRO 300 family are designed specifically to be used with prime telephoto lenses of 100mm or above, such as the Tokina AT-X 300 AF PRO, 300 mm f/2.8 lens, and work best with telephoto lenses of 200mm to 500mm. The PRO 300 can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for zoom lenses that have a range starting under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s own unique circuitry maintains signal integrity between the camera body and lens. These converters are designed to electronically operate the same way as an original manufacturer’s converter.1

Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of a lens by a specific amount. Common magnifications are 1.4 times and 2 times, but the Kenko Teleplus PRO 300 AF converter has a 3x magnification. For example, using a 3 times (3x) teleconverter will increase the focal of 300mm lens to 900mm.

The Teleplus PRO 300 converter is made with high quality multicoated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. The PRO 300 3x is designed for use with lenses of 50mm or above and work best with telephoto lenses of 100mm to 500mm. The PRO 300 3.0x can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for lenses that have a zoom range that starts under 50 mm.

KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s unique circuitry maintainS signal integrity between the camera body and lens. These converters are designed to electronically operate the same way an original manufacturer’s converter would provided there is enough light available.

Important Note: Due to the 3 stop light loss inherent in a 3x converter, Kenko PRO 300 3.0X has not AFcapabiltiy.  The lens must be focused manually.  The converter has all the circuitry for aperture activation and metering.

1. Most Canon EOS camera bodies are programmed to shut down auto focus if the calculated effective aperture for the lens and teleconverter is smaller than f/5.6, the Kenko Teleplus PRO 300 converters work the same way.

Specificaties KENKO PRO300 3,0x CONVERTER NIKON

Artikelnummer 100010370
EAN barcode 4961607622292
Merk Kenko
In de doos -
Gewichtstoeslag n.v.t. op dit product
Fabrikant art.nr. Nee
Garantie 1 jaar fabrieksgarantie
Lens beeldstabilisatie nvt
Geschikt voor full frame ja
Filtermaat nvt
Objectiefvatting Nikon F
Autofocus N/B
Digifoto Pro testoordeel nnb
DPreview testoordeel nnb

Er zijn nog geen reviews geplaatst voor dit product

Loading...

Loading...

Vragen over KENKO PRO300 3,0x CONVERTER NIKON

Nog geen vragen gesteld

Stel je vraag






Terug naar productpagina