KENKO PRO300 3,0x CONVERTER CANON
Kenko converters worden gemaakt met optisch glas van Hoya, de grootste fabrikant op dit gebied. NB: niet geschikt voor EF-S lenzen, alleen voor normale EF objectieven.
The PRO 300 family are designed specifically to be used with prime telephoto lenses of 100mm or above, such as the Tokina AT-X 300 AF PRO, 300 mm f/2.8 lens, and work best with telephoto lenses of 200mm to 500mm. The PRO 300 can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for zoom lenses that have a range starting under 50 mm.
KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s own unique circuitry maintains signal integrity between the camera body and lens. These converters are designed to electronically operate the same way as an original manufacturer’s converter.1
Placed between the camera body and lens, a teleconverter contains a set of optics that will effectively increase the focal length of a lens by a specific amount. Common magnifications are 1.4 times and 2 times, but the Kenko Teleplus PRO 300 AF converter has a 3x magnification. For example, using a 3 times (3x) teleconverter will increase the focal of 300mm lens to 900mm.
The Teleplus PRO 300 converter is made with high quality multicoated optical glass supplied by Hoya Corporation, the worlds largest manufacturer of optical glass. The PRO 300 3x is designed for use with lenses of 50mm or above and work best with telephoto lenses of 100mm to 500mm. The PRO 300 3.0x can be used with telephoto zoom lenses as well as prime lenses. However, Kenko does not recommend them for lenses that have a zoom range that starts under 50 mm.
KENKO PRO 300 AF Teleplus converters have genuine Gate Array IC (Integrated Circuitry). It means that the converter’s unique circuitry maintainS signal integrity between the camera body and lens. These converters are designed to electronically operate the same way an original manufacturer’s converter would provided there is enough light available.
Important Note: Due to the 3 stop light loss inherent in a 3x converter, Kenko PRO 300 3.0X has not AFcapabiltiy. The lens must be focused manually. The converter has all the circuitry for aperture activation and metering.
1. Most Canon EOS camera bodies are programmed to shut down auto focus if the calculated effective aperture for the lens and teleconverter is smaller than f/5.6, the Kenko Teleplus PRO 300 converters work the same way.
Specificaties KENKO PRO300 3,0x CONVERTER CANON
|In de doos||Nee|
|Gewichtstoeslag||n.v.t. op dit product|
|Garantie||1 jaar fabrieksgarantie|
|Geschikt voor full frame||ja|
|Digifoto Pro testoordeel||nnb|
Vragen over KENKO PRO300 3,0x CONVERTER CANON
Nog geen vragen gesteld